Sea current generator – Layout of steel sheet piles for generators

Sea current generator – Layout of steel sheet piles for generators

Because it is a laboratory machine, it only runs for a short time and then needs to be adjusted to have a commercial product. Therefore the pile must be convenient for the purpose of repeated use. For the above purpose, Larsen steel sheet pile, is selected.

The function of the Larsen pile system is to keep the generator stable on the bottom of river or seabed.

The layout of the pile system is so that it can withstand the maximum force, which is convenient for making piles, driving and pulling out piles, and it is convenient when connecting the pile system and the generator.

Currently, the Larsen pile driving in the river often uses self-propelled barges, with cranes, diesel generators, hydraulic pumps, and driving vibrators. Choose a barge large enough to carry all the necessary equipment.

When designing generators for the tail current of hydroelectricity, the author chooses the means of transport as containers. Therefore, from the rotating drum, the generator frame can be put into the container to be transported from the factory to the construction site.

 

Figure 1: Machine under construction to drive piles in Vietnam river.

 

Figure 2: Connection between two Larsen steel sheet piles in use in Vietnam

 

Figure 3: Types of Larsen steel boards available in Vietnam

Larsen steel poles are available in lengths from 6m to 18m. With a length of steel pole up to 18 m, it can be used for the purpose of exploiting flow kinetic energy downstream of Tri An hydropower plant with a depth of 2m to 6m.

 

Figure 4: Parameters of Larsen steel poles available in Vietnam

The steel sheet piles selected for use are U-shaped: 500 mm wide, 200 mm high, 24.3 mm thick. In Viet Nam and the world market, larsen steel piles are available in lengths from 6m to 18m

 

Figure 5: Layout of steel sheet piles for generators using tail current of hydropower plants.

 

 

Figure 6: Block diagram of steel sheet piles for generators using tail current of hydropower plants.

 

Figure 7: Layout of steel sheet piles for generators using tidal currents.

 

Figure 8: Block diagram of steel sheet piles for generators using tidal currents.

 

The above information so that readers can believe that Sea Current Generator is gradually forming in Vietnam. For a society to develop, all people need to be serious, so we hope that copyright is respected.

 

Eng. Doan Manh Dung